Series 8146 and Series 8125 socket-outlet assemblies are installed in hazardous areas where it is repeatedly necessary to use electrical equipment at short notice.
The individual socket-outlets can be protected by fuses 8561, miniature circuit breakers 8562 or earth leakage circuit breakers 8562. Switches 8543 and 8548 are available to isolate the entire assembly.
Because of the variety of assembly versions it is not possible to standardize. The assemblies are manufactured to order depending on the application.Zones 1 & 2, 21 & 22
Version |
Socket-outlet assemblies 8146 |
Explosion protection |
|
|
Gas explosion protection |
II 2 G EEx ed IIC T6, T5 or T4 |
|
Dust explosion protection |
II 2 D IP 66 T80 °C, T95 °C resp. T130 °C |
Certificates |
|
|
Gas explosion protection |
PTB 01 ATEX 1024 |
|
Dust explosion protection |
LCIE 02 ATEX 6241 |
Enclosure material |
Polyester resin |
Degree of protection |
IP 66 |
Ambient temperature |
- 20 °C ... + 40 °C |
KAT-TD
Technical Data |
Version |
Socket-outlet assemblies 8125 |
Explosion protection |
|
|
Gas explosion protection |
II 2 G EEx ed IIC T6, T5 or T4 |
|
Dust explosion protection |
II 2 D IP 66 T80 °C, T95 °C resp. T130 °C |
Certificates |
|
|
Gas explosion protection |
PTB 01 ATEX 1001 |
|
Dust explosion protection |
LCIE 03 ATEX 6292 |
Enclosure material |
depending on the version: sheet steel, galvanized, painted, light grey, RAL 7032 or stainless steel without painting (painting possible to order) |
Degree of protection |
IP 66 |
Ambient temperature |
- 20 °C ... + 40 °C |