Ex zone 1 and 21

Brass enclosure, nickeled

Long life

1 Reed contact

Actuation from front

Switching distance up to 25 mm depending on the actuating magnet

With pre-wired cable

Special version only for gas Ex zone 2 and dust Ex zone 22 available

N.B.: Please state required approvals for Russia, China and Brazil with your order!

Standards	EN 60947-5-2; EN 60079-0; EN 60079-18; EN 61241-0; EN 61241-1
Enclosure	brass, nickeled
Actuator	series M permanent magnet
Degree of protection	IP 67 to IEC/EN 60529
Contact material	silver
Switching system	reed contacts
Contact types	NC contact, NO contact or change-over contact
Connection	cable, H05VV-F or Lapptherm 145
Cable section	1NO, 1NC: 3 x 0.75 mm2, 1CO: 4 x 0,75 mm2
Cable length	2, 5 or 10 m
Switching voltage	250 V
Switching current	1.5 A
Switching capacity	1NC, 1NO: max.50 VA/W, 1NO: max.100 VA/W
Utilisation category	AC-15, DC-13
Bounce duration	0.3 … 0.6 ms
Ambient temperature	H05VV-F: –20 °C … +70 °C
Mechanical life	> 1 million operations
Electrical life	106 … 109 operations
Resistance to vibrations	1NO: 50 … 100 g, 1NC, 1CO: 10 … 50 g
Ex-certification	II 2G Ex mb IIC T6 Gb, II 2D Ex mb IIIC T80°C Db IP67 IECEx Ex mb II T6, Ex tD A21 IP67 T80°C
Approvals	DMT 01 ATEX E 058 X, IECEx BVS 07.0007 X